No products in the cart.
Thermal and sound insulation self-leveling cement mortar (as a tile’s adhesive substrate)

You can turn a ready-made self-leveling cement mortar of the market (powder type) of any composition into a special thermal and sound insulation product by adding only a small amount of Bauspot Holcer and Bauspot Acryl materials.

Proposed mixture (by weight):

80% self-leveling cement mortar + 20% Bauspot Holcer = 100% + 10: 1 Bauspot Acryl (or 20:1 Bauspot Acryl D)

Stirring instructions:

  1. Mix with a simple wooden stirrer (Bauspot stick) or mechanical stirrer an amount (by weight) of 80% of ready-made self-leveling cement mortar with 20% Bauspot Holcer.
  2. To the resulting mixture after mixing, add 12.5% Bauspot Acryl (or 6% Bauspot Acryl D)and as much water as needed to make the final mixture workable. That is, for a quantity of 1,125kg, (or 1,062kg) we need 800gr of ready-mixed cement mortar, 200gr Bauspot Holcer and 125gr Bauspot Acryl (or 62gr Bauspot Acryl D). For larger quantities use a mechanical stirrer.
  3. Apply directly to the desired surface in the usual way. Before application, make sure that the surfaces are clean and do not contain any type of greases. Before application, wet the surface.

Caution. Before the final application, do a test on a smaller surface to check the desired result.

One Reply to “Thermal and sound insulation self-leveling cement mortar (as a tile’s adhesive substrate)”

Leave a Reply

Your email address will not be published.

DIY solutions, innovative materials

and outstanding recipes.

Subscribe to our Newsletter!

Contact Us

Need help or have a question?

Contact us at:



+30 213 0907763

Our address: 17 Trikalon St. | 17342 |Athens | Greece

© copyright Bau-spot.com 2022 | Powered by