You can turn a simple tile adhesive (powder type) of any type of composition into a special thermal and sound insulation end product by adding only a small amount of materials Bauspot Holcer and Bauspot Acryl.

Proposed mixture (by weight):

90% of a ready made tile adhesive (of the market) + 10% Bauspot Holcer = 100% + 10: 1 Bauspot Acryl (or 20:1 Bauspot Acryl D)

Stirring instructions:

1. Mix with a simple wooden stirrer (Bauspot stick) an amount (by weight) of 90% tile adhesive with 10% Bauspot Holcer.
2. To the resulting mixture after mixing, add 10gr Bauspot Acryl (or 5gr Bauspot Acryl D) and as much water as needed to make the final mixture workable. That is, for a quantity of 110gr, you need 90gr of tile adhesive, 10gr Bauspot Holcer and 10gr Bauspot Acryl (total of 105gr if use 5gr Bauspot Acryl D). For larger quantities use a mechanical stirrer.
3. Apply directly to the desired surface in the usual way. Apply to both the ceramic tile and the welding surface (floor or wall). Before application, make sure that the surfaces are clean and do not contain any type of greases.

Caution. Before the final application, do a test on a smaller surface to check the desired result.